| Monitor Specifications |
| Monitor: | Viewsonic E90FB Flat CRT |
| Size: | 19" (18" Viewable) |
| Dot Pitch: | 0.21mm horizontal, 0.14mm vertical, 0.25mm diagonal |
| Max. Resolution: | 1600 x 1200 |
| Video Signal: | RGB Analog (75 ohms, 0.7/1.0 Vp-p) |
| Sync: | H/V separated (TTL), Composite |
| Horizontal Frequency: | 30-86kHz |
| Vertical Frequency: | 50-150Hz |
| Voltage: | AC 100-240V AC (auto switch) 50/60 Hz |
| Power Consumption: | 100 W Typ. |
| Input Connector: | 15 Pin D-sub |
| Operating Temperature: | 32-104° F (0-40° C) |
| Operating Humidity: | 5-95% (non-condensation) |
| User Controls: | Contrast, brightness, recall, H/V size, H/V position, pincushion, pin balance, trapezoid, parallel, tilt, degauss, moiré, ViewMeter®, zoom, language, ViewMatch® Color (9300, 6500, 5000, User), OSD lock |
| Regulations: | UL, CSA, FCC-B, ICS-003, DHHS, CB, MPR II, ENERGY STAR®, Energy 2000 |
| * Specifications subject to change. |
|
| Touchscreen Specifications |
| Touch Type: | Elo AccuTouch 5-Wire Resistive |
| Cable Interface: | USB Port |
| Touch Resolution: | 4096 x 4096 |
| Conversion Time: | 8.6 ms. per coordinate set |
| Light Transmission: | 80% +/-5% at 550 nm wavelength (visible light spectrum) |
| Durability Test: | 35,000,000 touches at one point |
| Temperature: | Operating: -10°C to 50°C Storage: -40°C to 71°C |
| Humidity: | Operating: 90% RH at max 35°C Storage: 90% RH at max 35°C for 240 |
| Chemical Resistance: | Acetone, Methylene chloride, Methyl ethyl ketone, Isopropyl alcohol, Hexane, Turpentine, Mineral spirits, Unleaded Gasoline, Diesel Fuel, Motor Oil, Transmission Fluid, Antifreeze, Ammonia based glass cleaner, Laundry Detergents, Cleaners (Formula 409, etc.), Vinegar, Coffee, Tea, Grease, Cooking Oil, Salt |
| Regulations: | UL, CE, TUV, FCC-B |
| * Specifications subject to change. |
|